RedEdge-MX Instructions
Attaching the RedEdge-MX and the Mount
1. Locate the four M3 x 8 mm flat-head screws and sensor mounting plate.
2. Peel off the brown protective paper from the sensor mounting plate.
3. Using the countersink screw holes, attach the mount to the back of the RedEdge-MX.
4. Locate the two M2 x 8 mm screws and the Go-Pro mount adapter.
5. Attach the Go-Pro mount adapter to the sensor mounting plate.
6. Locate the Quick Mount adapter and remove the thumbscrew.
7. Attach the Go-Pro mount adapter of the assembled sensor mounting plate to the Quick
mount adapter and secure it with the thumbscrew.
8. Connect the Quick Mount cable to the RedEdge-MX “PWR/TRG” port.
Mounting Bracket attached to RedEdge-MX
Rev 02 - July 2019
PAGE 5
