7. Attach the Go-Pro mount adapter of the assembled sensor mounting plate to the Quick
mount adapter and secure it with the thumbscrew.
8. Connect the Quick Mount cable to the Altum wire harness.
Fully connected QuickMount
Attaching the Altum and DLS 2 to the Matrice
Once assembled, the Quick Mount can quickly and easily be installed or removed from the
Matrice. Power is provided by the Matrice via the Quick Mount.
1. Attach the assembled Quick Mount (with connected Altum) to the Matrice using the DJI
lock mechanism on the Matrice.
2. Plug the DLS 2 cable from the DLS 2 port to the connector board.
3. Using the provided shorter 6-pin cable, connect the Altum “DLS” wire harness to the
connector board.
Diagram: Altum to Connector Board to DLS 2
4. Secure the connector board using the double sided tape in a safe location.
Rev 02 - July 2019
PAGE 8
