PAGE 2
What’s Required?
#1 Phillips Screwdriver
2 mm hex wrench
Cutting tool - such as scissors or diagonal cutter
1.5 mm hex wrench
Let’s get started!
Warning: Installation of this kit into a Matrice 100/600 drone should be done by an experienced
person, in adherence with all recommendations and guidelines of the Matrice manufacturer.
Before assembling this kit, ensure the Matrice is not powered, has the battery removed, and the
rotor blades removed. Failure to follow these instructions can result in injury and/or damage to
the Matrice or RedEdge-M.
Attaching the RedEdge-M and the RedEdge-M Mount
1. Locate the four M3 x 8 mm flat-head screws and RedEdge-M mount.
2. Peel off the brown protective paper from the RedEdge-M mount
3. Using the countersink screw holes, attach the mount to the back of the RedEdge-M.
4. Locate the two M2 x 6 mm screws and the Go-Pro mount adapter
5. Attach the Go-Pro mount adapter to the RedEdge-M mount.
6. Locate the QuickConnect mount and remove the thumbscrew.
7. Attache the Go-Pro mount adapter of the assembled RedEdge-M mount to the Quick Mount and secure
it with the thumbscrew.
8. Connect the RedEdge-M power adapter cable from the RedEdge-M “PWR/TRG” port to the end of the
QuickMount cable.
Mounting bracket attached to RedEdge-M
RedEdge-M mount attached to Quick-
Connect adapter
Fully connected QuickMount