1.Place a battery into No.4 channel.
2.Synchronously press the keys and for a relatively long time until
the feature flashes.
3.Press the key for a short time to select opening or closing the function
of battery discharging.
4.Press the key for relatively long time to confirm setting and exit. And
the setting would be confirmed and the exit would be activated if there is no
operation to press the key made within 5s.
Setting:
1. When the battery placed in No.4 channel is being discharging (while the
icon is flashing)
2. Press the keys for a relatively long time until the feature flashes
in the LCD.
3. Then press the key for a short time to select a discharging current
which may be between 0.1A and 0.4A.
4. Press the keys for a relatively long time to confirm the current. And the
setting would be confirmed and the exit would be activated if there is no
operation to press the key made within 5s.
Setting:
After the function of discharging is activated, the charger would firstly charge the
battery to full capacity and the launch a constant current discharging. Then, real
time calculate the battery capacity and save the data about battery capacity. After
discharging, the battery would be charged again until its full capacity and then
the charging stops.
When the icon is displayed, it means that the function to measure
battery capacity is activated.
When the icon disappears, it means that the function to measure
battery capacity is inactivated.
Setting of battery capacity measuring against
discharging(only limited to No.4 channel)
At the default status, the charger could automatically select an optimal
discharging current based on battery characteristics.
Setting of discharging current (only limited to No.4 channel)
Note: Under the All Selected mode, a setting is only effective to such a
channel as contains a battery. It is impossible to select battery type for a
Ni-MH/Ni-Cd battery.
05
