Press the key for relatively long time until all the channel symbols flash,
which means an access to a All Selected mode. And the ALL Selected
mode would be exited if there is no operation launched in 5s after the above
access.
After full capacity is achieved, the word would be displayed in the
LCD and it means that the charger had automatically stopped charging
because overcharging would shorten the normal service life of the battery.
Note: When a Ni-MH battery which is charged fully and also indicated by the
word Full accordingly is taken down from the charger and then placed into the
same charger again soon after, if an energy percentage of 70% and even
lower is shown, it is normal because of the characteristic of the Ni-MH battery.
Automatic charging stop after full charge
Place the battery into any channel and then click the key twice to
flash Battery type. And then press the key for a short time to circularly
display the battery type and select to confirm the battery type wanted. An
automatic exit would be made 5s after the above selection. Alternatively,
press the key for a relatively long time to exit.
Setting of battery type
1. Place a battery into any channel.
2. Press the key for relatively long time until the feature is flashed
in the LCD. And then press the key for a short time to select the
charging current. An automatic exit would be achieved 5s after the above
selection. Alternatively, press the key for a relatively long time to exit.
1.Under the All Selected mode, a charging current may be set up synchro-
nously for four channels by pressing the key for relatively long time.
2. Under the All Selected mode, battery type may be selected synchronously
for four channels by clicking the key twice.
Setting of charging current
Synchronous four-channel setting
Li-ion / LiFePO4
Ni-MH / Ni-Cd
Levels of
charging current
0.1A / 0.2A / 0.3A / 0.4A / 0.5A /
0.6A / 0.8A / 1.0A / 1.2A / 1.5A
Default current
0.1A / 0.2A / 0.3A / 0.4A / 0.5A /
0.6A / 0.7A / 0.8A / 0.9A / 1.0A
Default current
Default current:
The current symbol“ ”flashing means that the charger could
automatically distribute the charging current based on the internal resistance
of the battery.
04
