“ ” means the energy charged into the battery in this charging operation.
“ ” means the battery capacity is being measured against discharging (only
limited to No.4 channel).
Battery capacity:
Battery test and error report
Battery activation and test
Reverse connection of battery The symbol about the battery placed in
the current channel flashes and the code
is also displayed simultaneously.
Short circuit of battery
After the battery is placed rightly and proved normal, normal charging
operation commences.
Prompt about error report
1. Connection with power supply.
2. Place a battery into any channel and then, the charger could automatically
distinguish the battery type and commences testing relevant battery
parameters which would be displayed in a LCD
.
3. If the charger is not set up specially, the charger could automatically
distribute the charging current based on the internal resistance of the battery.
4. Press the key in a short time to switch over the information displayed
respectively about one of the channels C1-C4. Meanwhile, the LCD
backlight would be illumed.
Direction for operation
The charger is unable to automatically distinguish LiFePO4 / 4.35V Li-ion
battery. The user shall select the battery type by manual operation. If
there is no manual setting made to a LiFePO4 battery, a standard
charging would be launched which is exclusively applicable to Li-ion 4.2V battery,
which would means a risk of explosion.
The charger is only compatible with lithium-ion battery, IMR, INR, ICR, lithium iron
phosphate battery(LiFePO4 battery) and Ni-MH/Ni-Cd batteries. Its charging aiming
at the battery beyond those mentioned above may cause explosion, battery
breakage or leakage, personal injury or property loss.
Battery type:
It means the type of the battery placed in the current channel.
Charging/discharging time:
It means the cumulative charging/discharging
time of the battery placed in the current channel in this charging/discharging
operation.
03
