11
4. WARNING AND ERROR MESSAGES
In case of an error the screen will display the cause of error and emit an audible sound.
DC input voltage of the charger is higher than 30 V. Check the input voltage.
DC input voltage of the charger is lower than the value set in the Setting/Public Setting/Low Input voltage
menu. Check the input voltage.
The charged battery was connected with incorrect polarity.
The charging cables and/or internal wiring/connections of the battery are broken.
The voltage of the battery pack is higher than the charging end voltage. Check the battery and the value of the
charging end voltage in the menu please.
The voltage of the battery pack is lower than the discharging end voltage. Check the battery and the value of
the discharging end voltage in the menu please.
The voltage of the battery does not correspond to the set number of cells. Check the number of cells please.
The voltage of a cell in the battery pack is higher than the charging end voltage; check the voltage of each cell
and the value of the charging end voltage in the menu please.
The voltage of a cell in the battery pack is lower than the discharging end voltage; check the voltage of each cell
and the value of the discharging end voltage in the menu please.
The battery has been charged already; no need to charge it again.
The battery temperature (measured by an optional temperature sensor) is higher than the temperature limit
set in the Setting/CH1 (CH2) Settings/Ext.Temp cut-off menu.
The capacity is higher than the capacity limit set in the Setting/CH1 (CH2) Settings/Capacity Cut-off menu.
The charging time has exceeded the time limit set in the Setting/CH1 (CH2) Settings/Safety Time cut-off menu.
