Prodomus
14
unit is in operation! Only touch the cool touch handle
to open or close! Never touch hot lid or housing!
Caution! Always keep enough distance to heat or steam
sensitive surface, walls, furniture. Ensure that the cord
does not touch hot parts of the appliance like lid or
housing.
Caution! Risk of overheating the appliance! Never operate
the appliance without water or with open lid!
Caution! In case of overfilling there is danger of burning
by splashing, or overflowing hot water!
B
B
e
e
f
f
o
o
r
r
e
e
t
t
h
h
e
e
f
f
i
i
r
r
s
s
t
t
u
u
s
s
e
e
Remove all packaging material as carton and foils.
Unroll the cord completely.
Clean the stainless steel surface with a slightly damp cloth and dry
thoroughly.
If necessary cook some water, empty and rinse the water kettle afterwards to
remove production residues that might be inside. Always take care not to let
water run into the electric parts of the unit.
Place the unit on a stable, dry non-slip and heat resistant surface.
Connect the appliance to the current. Fill in approx. 0.5 io 1.0 l of water. Close
the lid properly. Turn the switch ON. The control lamp is illuminated.
Switch off after this process, and unplug.
Open the lid and let the unit cool down. Empty the water kettle.
Wipe the surface with a slightly damp cloth to remove stain due to water
spotting.
H
H
o
o
w
w
t
t
o
o
u
u
s
s
e
e
t
t
h
h
e
e
w
w
a
a
t
t
e
e
r
r
k
k
e
e
t
t
t
t
l
l
e
e
Place the appliance on a dry, stable, heat resistant and non-slip surface.
Close the lid and place the appliance onto the power base, plug in and switch
on, indicator light will turn on. The water kettle starts heating up.
In order to fill in water,
always
lift off the reservoir from the base station.
Use cold, fresh water only to fill the water kettle. Open the lid and fill the
reservoir carefully with water. The quantity of water has to be between MIN
and MAX (see water level scale) – don't exceed or under-run the indicators.
Close the cap carefully until it is locked. The automatic switch-off can work
only with a properly closed cap.
Put the kettle on the base station and switch-on the appliance by switching
the ON/OFF switch to
I.
The control lamp is illuminated.
The boil process can be interrupted at any time by positioning the switch to
OFF(down).
