Mia Cucina AEF180, User Manual

Page: 6 / 32

4
Installation and connections

Selecting the location
 Place the appliance in dry and well aired
room. The appliance operates best at
temperature ranges indicated in the chart
below. Relevant class of the appliance is
indicated on the rating plate.

Positioning the appliance
Positioning the appliance requires two
persons in order to avoid injuries or damage
to the appliance.

Place the appliance flatly and firmly on a
solid base. The appliance is fitted with
adjustable feet on the front side, used to
level the appliance (certain models only).

Avoid exposing the appliance to direct
sunlight or heat sources. If this is not
feasible, install insulation plate between
the appliance and adjacent heat source.
 The appliance should incorporate it into
the kitchen cabinet. Be sure to leave
enough space for cooling of condenser
(distance from the wall or the opening
should be 200 cm2).
Order code: 376078 (appliances higher than
1,700 mm)
Class Ambient temperature
SN (subnormal) from + 10°C to + 32°C
N (normal) from + 16°C to + 32°C
ST (subtropical) from + 16°C to + 38°C
T (tropical) from + 16°C to + 43°C
WARNING
 After the installation, the appliance
mains plug should be accessible!

When installing built-in appliances
into a cupboard or cabinet in a side-
by-side layout, the dew prevention
installation kit should also be
purchased and installed. For safety
reasons, dew prevention kit may
only be installed by an authorized
Description of appliance & Installation and connections
Description of the appliance
 A Refrigerator
 Fan

Interior light

Control panel

Horizontal bottle rack*
 Adjustable glass shelves
 Pull-out glass shelf (adjustable height)

Removable snack tray

Foldable egg rack
(closed - 6 eggs, open - 12 eggs)
 FreshZone pan

Vegetable crisp pan

Refrigerator door pans

Door bottle rack with safety holder

B Freezer
13. Storage compartment
 Freezing compartment
* Interior equipment of the appliance will typically
vary according to the specific model.