Mia Cucina AEF180, User Manual

Page: 16 / 32

14
If none of the above reasons seems to match your problem, please contact the nearest service center
and state the type, model and serial number as indicated on the label with basic information attached in
the appliance interior.
Bulb replacement:

Before replacing the light bulb, disconnect the appliance form
the power supply (pull the power cord from the wall socket).

Use the screwdriver to press the locking hook (in arrow
direction), and remove the cover. Replace the bulb with the
equivalent new bulb (E 14, same voltage as the original one)
and replace the cover back to its position.

Don’t forget: the old bulb does not belong to organic waste.

Light bulb is consumption material and is not covered by the
warranty!

Bulb lamps used in this appliance are special purpose lamps
selected for household appliances use only. They are not
suitable for household room illumination.
Signal light B is flashing:

If the signal light B is flashing, call a service technician.
Error code indicated on the
display (only with some models):

If “E” appears on the display, call a service technician.
Troubleshooting guide
Noise level
The refrigerator – freezer appliances are cooled
by the refrigeration system with a compressor
(assisted by fan in certain models) whose
operation may produce certain noise. The level of
such noise depends upon the location, correct use
and age of the appliance.

After starting the appliance, the operation of
the compressor (the refrigerant flow) may be
somewhat louder. This does not mean that
something is wrong with the appliance,
neither has it any influence on the lifetime of
the appliance. Gradually the noise is reduced
and eventually subsides.

Sometimes the appliance produces unusual
and stronger noise which is rather unusual
for the appliance. This noise is often the
consequence of inadequate positioning of the
appliance:
 The appliance should be placed and
leveled firmly on solid base.
 It should not touch the wall or adjacent
kitchen units standing next to it.

Check whether the accessories in the
interior of the appliance are placed
correctly in their positions; also check
the bottles, tins and other vessels that
might touch each other and rattle.
THE MANUFACTURER RESERVES THE RIGHT
TO ALTER THE SPECIFICATIONS WITH NO
IMPACT TO THE FUNCTIONAL OPERATION OF
THE APPLIANCE.