HOM-SERIES Hot Water Heater module Operator's Manual
3
installatiOn
QuestiOns
cOdes:
. Does the electrical supply meet respected codes?
2. Does the ventilation system meet respected codes?
lOcatiOn:
. Is the unit installed indoors on a level surface in a dry area
protected from excessive wind, rain and moisture?
2. Is the unit located away from flammable and combustible
material?
3. Is the unit located in a large enough area for adequate air flow?
electrical:
. Is the unit properly grounded?
2. Do all electrical components used meet requirements shown
on the unit I.D. Plate and is the voltage correct?
VentilatiOn:
1. Are the correct flue pipe and draft hood sizes employed?
2. Is there adequate ventilation for burner combustion?
3. Is the unit properly vented to allow adequate air flow?
4. Is exhaust stacked to outside atmosphere?
general:
. Have all operators using this unit read the Installation and
Operator's Manual and understood all safety warnings?
2. Has the unit been installed by qualified service people who
followed the Installation and Operator's Manual instructions?
3. Is there ample water supply?
YES NO
pre-OperatiOn cHecKlist:
Before starting the unit, answer the questions in this checklist:
if nO Was marKed fOr anY Of tHese QuestiOns, cOrrect tHe situatiOn BefOre
Operating tHis unit.
