The app now searches for devices that are
in learning mode.
If a device was found, a name can now be
assigned. After touching "Done", the
integration of the thermostat is
successfully completed.
The picture shows the main view of the
thermostat. The setpoint temperature is
shown in the centre of the display and the
current room temperature is shown
below. The setpoint temperature can be
adjusted manually using the plus/minus
key. The functions of the buttons "
Switch
",
"
Mode
", "
Settings
", "
Pen symbol
" are
explained in Figures 13, 14, 15 and 18.
The thermostat can be switched on or off
by touching "Switch".
Touch "Mode" to change the operating
mode of the thermostat (Auto/Manual).
Touch "Settings" to set the heating/cooling
mode, the childlock, the weekly
programme (figure 16) and the timer
(figure 17).
