70D0004
18
TPB Series Log Set
Before you begin
— This unit is supplied with seven (7) ceramic fiber logs. Do not handle these logs
with your bare hands.
Always wear gloves to prevent skin irritation from ceramic fibers.
After
handling the logs, wash your hands gently with soap and water to remove any traces of fibers.
INSTALL CHARRED TIMBER LOGS ON BURNER
LOG PLACEMENT
W
ARNING
The positioning of the logs is critical to the safe and clean operation of
this heater. Sooting and other problems may result if the logs are not
properly and firmly positioned in the appliance. Never add additional
logs or embellishments such as pine cones, vermiculite or rock wool
to the heater. Only use the logs and TPB18-RW rock wool supplied with
the unit.
Failure to position the parts in accordance with diagrams below or to use
only parts specifically approved for this heater may result in property
damage or personal injury.
LG1017
TPB rear log
Rear Log #1
LG1017
Figure 19
1. Place rear log (#1) on
two pins located on
the back of the grate.
Figure 19