MHS Boilers CRUZ belt, Installation, Operation & Maintenance Manual, Page: 15 / 46

CRUZbelt
15
E0032544Rev090710
CRUZbelt is slightly different to track than other
conveyor. Since the belt is only 7/16” narrower than
the between frame dimension, some belt contact
with the side frame is expected. However, the belt
must not be allowed to contact the frame near any
end pulley or snubber.
CAUTION
Belt must not be allowed to contact the side frame
near an end pulley or a snubber.
Some basic tracking information:
•
The belt moves TOWARD the end of a
pulley it contacts first.
•
Use snubber tracking brackets before using
tracking cams. End pulley tracking is used
as a last resort.
•
Tracking brackets and cams only affect belt
DOWNSTREAM of the device. Find the
nearest bracket or cam upstream from the
problem area and adjust as shown.
•
Adjust bracket or cam slightly and watch belt
for several revolutions before continuing.
CAUTION
CRUZbelt conveyor must be used with
mono-filament belting. Use of any other belting
will damage conveyor. Consult your
MHS
Conveyor
distributor for belt specifications.