MH RYZ 50 Cross C, Service Manual

Page: 50 / 92

RYZ
SEPARATING THE ENGINE CRANKCASES
Remove the three securing bolts on the left-hand crankcase.
Fit the protective bush onto the crankshaft-connecting rod.
Special tool (D)
Fit the crankcase opening tool supplied with the plate onto the
left-hand crankcase.
Special tool (E)
Special tool (F)
Fit the assembly onto the crankcase with the four bolts. (1).
Remove the two rubber engine support mounting pegs.
Turn the tool’s central bolt until the crankcases separate.
N.B.:
On opening, tap the ends of the secondary and selection
shafts alternately with a plastic mallet to ensure that the
two crankcase separate in parallel.
Remove the left-hand crankcase.
N.B.:
Recover the friction washers that may be stuck to the left-
hand crankcase with oil.
Remove the centring rods (2).
Remove the two rubber engine support mounting pegs.
1)
2)
3)
4)
5)
6)
7)
8)
9)
5-12 ENGINE
5