MH RYZ 50 Cross C, Service Manual

Page: 88 / 92

RYZ
UNSTABLE HANDLING
• Handlebars bent or incorrectly fitted.
• Top support incorrectly fitted.
• Bottom support fitted incorrectly (badly tightened lock nut).
• Bent steering shaft.
• Damaged ball bearings or bearing guide ring.
• Uneven fluid levels (in the two front fork arms).
• Uneven fork spring tension (in the two front fork arms).
• Broken fork spring.
• Inner tube bent or damaged.
• Outer tube bent or damaged.
• Worn bearing or hose.
• Swinging arm bent or damaged.
• Faulty rear shock absorber spring.
• Oil or petrol leak.
• Uneven tire pressures (front and rear).
• Incorrect tyre pressure.
• Uneven tyre wear.
• Incorrect wheel balancing.
• Broken or loose spokes.
• Damaged wheel bearing.
• Bent or loose wheel shaft.
• Excessive decentring of the wheel.
• Bent frame.
• Damaged steering column tube.
• Incorrectly fi tted bearing guide ring.
FAULTY LIGHTING SYSTEM OR TURN INDICATORS
HEADLIGHT DOES NOT COME ON
• Incorrect headlight bulb.
• Too many electrical accessories.
• Excessive load.
• Incorrect connection.
• Circuit incorrectly connected to earth.
• Faulty contacts (main switch).
• Blown headlight bulb.
BLOWN HEADLIGHT BULB
• Incorrect headlight bulb.
• Battery faulty.
• Headlight bulb has reached end of life.
REAR LIGHT/BRAKE LIGHT DOES NOT COME ON
• Incorrect rear light/brake light bulb.
• Too many electrical accessories.
• Incorrect connection.
• Blown rear light/brake light bulb.
7-6 TROUBLESHOOTING
7