MH Instek MHS-5200-06M, Operating Manual

Page: 20 / 21

:rXa Read amplitude for chan X :rXaNNNN
:sXb Set chan X on or off ok 1=on,0=off
:rXb Read chan X on or off :rXbN
:s3b Set trace on or off ok 1=on 0=off
:r3b Read trace on or off status :r3b
:s4b Select ext in or ttl ok 0=ext 1=ttl
:r4b Read ext in or ttl :r4bN
:r0e Read freq/count value :r0eXXXXXXX Depends on selected
reading type
:sNg Set gate value ok 0=(1s), 1=(10s),
2=(.01s), 3=(.1s)
:r1g Read gate value :rNg See above
:s3f Set Sweep Start ok
:r3f Read Sweep Start :r3fNNNNNNNN NN
:s4f Set Sweep End ok
:r4f Read Sweep End :r4fNNNNNNNN NN
:s7bN Set Line/log ok N=1 for lin,0 for log
:r7b Read line/log :r7bN
:s8bN Start Stop sweep ok N=0 for stop,1 for
start
:r8b Read sweep state :rb8N
:aNX Set arb data for N ok 1024 samples in 16
slices,64 samples per
slice. N=0...F for each
slice. Each sample is 0
to 255 with 125 as the
nominal center
:s9b Turn on/off power amp ok If equipped
;
0=off,1=on
:r9b Read amp status :r9bN
:r1m Read counter/frequency mode :rNm N=Mode (see below)
:s1m Set mode to counter ok
:s0m Set mode to freq ok
:s2m Set mode to + pulse width ok
:s3m Set mode to pulse width ok
:s4m Set mode to period ok
:s5m Set mode duty cycle ok
20