22
24.11.14 / V 01.0-E
In order to use 6 cutting edges of the carbide inserts WP 4 – 6 R3, proceed as
follows:
Milling smaller bore holes or smaller inner con-
tours,
use the small distance guiding bearing
H3-R3.1 Ø 24,8mm.
Mount the radius inserts WP 4 – 6 R3 in to the
upper bore hole.
By turning of the carbide insert, 2 cutting
edges can be used processing smaller bore
holes.
Employed cutting edges are 1 an 2.
1
2