21
24.11.14 / V 01.0-E
17.
Adjusting the radii:
The lateral position of the radius
to the side of the workpiece is
determined by the guide bearing fitted.
Cutting a lager plate with a plasma cutter
may result in a 7° deviation of the upper
and end faces of the workpiece.
Depending on how the plate is milled
there can always be different cutting results.
So if you want to mill a radius R3 mount
the sleeve H3-R3-3 (4) and then adjust
the height of the guide plate.
Customize a test piece and corret the
height adjustment.
The guide plate always closes with the
end of the radii plate.
Radius