MGS HBM R3 Operating Manual Download Page 12 | Manualshive

Page: 12 / 38

MGS HBM R3 Operating Manual Download Page 12

12

24.11.14 / V 01.0-E

Indexable inserts

11. Changing the indexable cutting inserts

Property damage caused by blunt tools

Overcharge of the machine!

Regular testing of tools for abrasion is

recommended.

Please wear protection gloves when changing

the indexable cutting inserts.

In order to change the cutting inserts which can be

used with the edge milling machine HBM R3, kindly

proceed as follows:

Place the machine on the upper surface and turn the

guiding plate downwards as much as necessary to

get the cutting inserts totally free so that you can

turn them easily or exchange them.

Always use a Torx T15.

We recommend to change defective plates or insert

screws immediately.

To avoid a turning away of the milling tool, lock

the drive shaft with the lock button.

For all maintenance work the

machine must be disconnected from the

power supply system!

The carbide inserts must always be mounted in the same drill

hole line.

Mounting the carbide inserts offset will result in imbalance an

can lead to serious damages.

«
...
10
11
12
13
14
...
»

Summary of Contents for HBM R3







































Reviews:

No comments