4. Advanced Operations
Configuring Traps
SNMP Trap Command Summary
Command Description
Set Trap EM Status
Enables or disables the Environmental Monitor Status trap
Set Trap THS Status
Enables or disables a temperature/humidity sensor Status trap
Set Trap THS Temp
Enables or disables a temperature/humidity sensor Temp trap
Set Trap THS Temphigh
Sets a temperature/humidity sensor Temp trap high limit
Set Trap THS Templow
Sets a temperature/humidity sensor Temp trap low limit
Set Trap THS Humid
Enables or disables a temperature/humidity sensor Humid trap
Set Trap THS Humidhigh
Sets a temperature/humidity sensor Humid trap high limit
Set Trap Tower Status
Enables or disables the Tower Status trap
Set Trap Infeed Status
Enables or disables the Infeed Status trap off
Set Trap Infeed Load
Enables or disables the Infeed Load trap
Set Trap Infeed HighThresh
Sets the Infeed Load trap high limit
Set Trap Outlet Change
Enables or disables the Outlet Change trap
Set Trap Outlet Status
Enables or disables the Outlet Status trap
Show Traps
Displays trap configurations
Enabling or Disabling a Status trap
The Set Trap … Status command is used to enable or disable Status traps for a Tower, Infeed, Outlet,
Environmental Monitor or Sensor.
To Enable or Disable a Status trap:
At the Switched PDU: prompt, type
set trap
(
tower
,
infeed,
outlet, em
or
ths
)
status
, followed by the
tower, infeed, outlet, Environmental Monitor or sensor name, and
on
or
off
.
Press
Enter
, or
Type
set trap
(
tower
,
infeed,
outlet, em
or
ths
)
status all
, followed by
on
or
off
and press
Enter
.
Examples
The following command enables the Status trap for the first tower, using the tower’s absolute name:
Switched PDU: set trap tower status .a on<Enter>
The following command enables the Status trap for the tower named Florida_HQ_1:
Switched PDU: set trap tower status Florida_HQ_1 on<Enter>
NOTE: Enabling lower hierarchical traps automatically enables traps of higher hierarchical value: i.e. enabling
an Outlet Status trap automatically enables the Infeed and Tower Status traps for that outlet. Conversely, if a
Tower Status trap is disabled, all associated Infeed Status & Load and Outlet Status traps will be disabled.
Page 52 - 301-0399-4 Rev A.
