3. Operations
SNTP Administration
Switched PDU supports the use of a network time service to provide a synchronized time reference.
Setting the SNTP server address
The Set SNTP command is used to set the primary and secondary SNTP server addresses.
To set the SNTP server address:
At the Switched PDU: prompt, type
set sntp
, followed by
primary
or
secondary
, and the SNTP server IP
address. Press
Enter
.
Example
The following command set the primary SNTP server address to 204.152.184.72:
Switched PDU: set sntp primary 204.152.184.72<Enter>
Displaying SNTP configuration information
The Show SNTP command displays all SNTP configuration information.
To display SNTP configuration information
At the Switched PDU: prompt, type
show sntp
and press
Enter
.
Example
The following command displays the SNTP configuration information:
Switched PDU: show sntp <Enter>
SNTP Date/Time (GMT): 2003-02-21 21:32:48
SNTP Primary IP Address: 204.152.184.72
SNTP Secondary IP Address: 0.0.0.0
301-0399-4 Rev A. - Page 43
