MGE UPS Systems 66102, User Manual

Page: 62 / 63

T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual 34003991EN/GA - 62 -
NTP N etwork T ime P rotocol
Protocol to position a set of machines on a network at the same time.
Programmable outlet (controlled outlet) :
Outlet that can be remote-switched on or off. UM-Client components enable management of such outlets.
REBOOT –
To restart a system after an interruption.
– To perform an obstacle-free “reboot”, it is essential that the system is correctly and carefully shut down beforehand.
– The reboot is usually automatic if the computer is re-supplied with electricity (from the utility or from the UPS).
RFC
Request for Comments. All documents defining internal Internet operation.
SNMP (SIMPLE NETWORK MANAGEMENT PROTOCOL)
Protocol used to remote-supervise, administrate and control devices connected to a company network.
SMTP (SIMPLE MAIL TRANSFER PROTOCOL)
Enables message transfer between e-mail servers or between the client and its server. It is based on the server’s port 25. It is described in
RFC 821
SSL (Secure Sockets Layers ) is a protocol developed by Netscape Communications Corporation for securing data transmission in
commercial transactions on the Internet. Using public-key cryptography, SSL provides server authentication, data encryption, and data
integrity for client/server communications
Subnet mask:
Mask of bits used to identify and differentiate the network address and the equipment address in an IP address.
Normally, the mask is automatically determined by the class of address, which defines in a unique manner the network part/equipment part
division of the IP address.
- Class A: internet address: 255.0.0.0.
- Class B: internet address: 255.255.0.0.
- Class C: internet address: 255.255.255.0.
TCP/IP
Transmission Control Protocol/Internet Protocol. Common name of a series of protocols developed by the DOD in the US to help build Internet
networks throughout the world.
Telnet
Internet protocol used for terminal emulation, i.e. enabling a computer to connect with a server as if it was a simple terminal locally connected
to this server.
Trap (SNMP)
This term describes an event that affects an MIB variable. Traps are sent to the
manager, which is programmed to perform specific tasks upon reception of the
Downloaded from Elcodis.com electronic components distributor