MGE UPS Systems 66102 Page 11 User Manual Download

Page: 11 / 63

T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R

Network Management Card – User Manual

34003991EN/GA

- 11 -

Service port

LED

Colour

Activity

Description

UPS

Green

Off

Card startup in progress.

Data

Communication with UPS in progress

Flashing

Normal operation.
Communication with the UPS is
operational

RS232

Orange

Off

Configuration menu is active

Normal operation. Configuration
menu is deactived

Flashing

Communication with the Environment
Sensor (option).

2.1.3 Installation in the UPS

The

Network Management Card (66102)

can be "hot" installed in all UPSs of the MGE UPS SYSTEMS range equipped with a Minislot

without having to shut it down.

Remove the protective plastic cover from the Minislot

Note the card's MAC address prior to insertion

Insert and tighten the card's retaining screws

Connect the ETHERNET cable

Wait 2 min.; the card is completely operational when the green UPS Data LED flashes continuously

2.1.4 Sensor installation (option)

The Environment sensor is available as an option on the

Network Management Card

and is available from MGE UPS SYSTEMS (reference

66846).

The sensor allows remote monitoring of the UPS's environment through regular measurements: temperature, humidity, status of two external

contacts. It also enables notification of alarms (e-mail, trap SNMP) according to pre-programmed thresholds.

It is connected to the Service port (Settings/Sensor) directly on the

Network Management Card

with a standard Ethernet cable (20 meters

maximum).

Recognition is automatic. Supervision and configuration are performed via a menu that can be accessed directly from the home page.

Downloaded from

Elcodis.com

electronic components distributor

Summary of Contents for 66102
































































Search results

Summary of Contents for 66102

Reviews:

Related manuals for 66102

Brands by name

Popular brands

MGE UPS Systems 66102, User Manual

Search results

Summary of Contents for 66102

Reviews:

Related manuals for 66102

Brands by name

Popular brands