T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual
34003991EN/GA
- 20 -
4.2.4 UPS weekly schedule programming
Click on the "
Weekly schedule
" section of the menu.
UPS configuration may prevent the shutdown and restart commands from being properly run. Read the UPS user manual for more
information.
The weekly schedule enables the administrator to optimise power consumption or program a reboot of the protected equipment at a set time.
In a shutdown sequence, the
Network Shutdown Modules
connected to the card are informed and ensure that each machine is shut down
correctly before the UPS output is switched off.
Up to 7 UPS shutdown sequences can be programmed in one week, with a minimum shutdown delay of 30 minutes.
The On / Off sequences are valid only if the card's time has been properly set
.
Security
: The administrator clicks on "
Save
" and enters his/her login / password to save any edits. The login and password by default are:
MGEUPS
Downloaded from
Elcodis.com
electronic components distributor
