INSTRUCTION MANUAL
MG MOTOR
20
A.5 Product Installation
• Tool list
Electric drill, tape measure, screwdriver, pen, tape, tool hammer, mounting screws, expansion screws,
hex wrenches, crimping tools, paper-knife.
A.5.1
WALL-MOUNTED CHARGER
The general assembly drawing is shown in Figure A-2.
Figure A-2 General assembly drawing of wall-mounted charger
1. Please confirm the installation location and mark it on the wall. It is suggested that the top height of
charger should be about 1.2 meters from the ground, as shown in Figure A-3.
Expansion tube
Self tapping screw
Mounting bracket
Emergency
Stop switch
Wall box
Screw
Screw
Screw
Cable clamp
Sealing strip
Back cover
M8*60
M6*50 (4X)
M4*12 (6X)
M4*12 (2X)
M6*12 (2X)
