manualshive.com logo in svg

MFJ MFJ-495, Instruction Manual, Page: 4 / 60

Share
Download
MFJ MFJ-495 Instruction Manual Download Page 4

MFJ-495 Memory Keyer 

Instruction Manual

 

ii 

©

 2001-2009 MFJ Enterprises, Inc.

 

Queue................................................................................................................................ 15 
User................................................................................................................................... 15 

 
 

THE PADDLE 

Using the MFJ-495 with a Paddle.................................................................................................. 16 
Setup Commands ........................................................................................................................... 16 
Message Memory........................................................................................................................... 20 

 
 

THE KEYBOARD 

Using the MFJ-495 with a Keyboard............................................................................................. 21 
Keyboard Key Combinations......................................................................................................... 21 
Setup Commands ........................................................................................................................... 23 
Message Memory........................................................................................................................... 27 
Quick Speeds ................................................................................................................................. 28 

 
 

THE TERMINAL 

Using the MFJ-495 with a Terminal Program ............................................................................... 29 
Setup Commands ........................................................................................................................... 29 
Message Memory........................................................................................................................... 34 
Uploading and Downloading Messages......................................................................................... 34 

Loading a Memory Block from the Computer.................................................................. 34 
Sending Contents of a Memory Block to the Computer................................................... 35 

 
 

THE MEMORY 

Message Memory........................................................................................................................... 36 
Preparing Messages ....................................................................................................................... 37 
Embedded Commands ................................................................................................................... 37 

 
 

APPENDICES 

Resetting the Keyer........................................................................................................................ 41 

Factory Defaults................................................................................................................ 41 
Message Memory Reset.................................................................................................... 42 

Self Test ......................................................................................................................................... 42 
Power Down Circuit Test............................................................................................................... 43 
Troubleshooting ............................................................................................................................. 44 
Technical Assistance...................................................................................................................... 44 
Morse Code Character Set ............................................................................................................. 45 
Signals Used in Other Radio Services ........................................................................................... 46 
Some CW Abbreviations ............................................................................................................... 46 
Meaning of Q Signals .................................................................................................................... 47 
Setup Commands ........................................................................................................................... 48 
Schematic....................................................................................................................................... 50 

 
 

Summary of Contents for MFJ-495





























































Reviews:

No comments