12
4.2. Installation of transformer
The E-NERGY CARBON Power Supply BASIC TT is referred to as a device in the manual.
The device may only be installed in closed rooms. It is designed for surface-mounted and
Suitable for flush mounting and must be protected from moisture, heavy dust, aggressive liquids and vapors.
Always ensure sufficient heat dissipation (distance to thermal insulation) and ventilation.
An ambient temperature not exceeding 40 °C must not be exceeded.
Any interventions or changes to the power supply lead to exclusion of guarantee or warranty and can destroy the
system! The warranty is void if the fault is due to an accident, use of force, incorrect connection, penetration of
liquids, poor maintenance or misuse. The warranty is also void if the damage is caused by thunderstorms or other
voltage variations.
Select the installation site taking into account the safety instructions and the following
points of view carefully:
• The maximum cable length between the heating track and the device is 10 m (2.5 mm2) or 25 m (6 mm²).
Place the device in such a way that all heating tracks are accessible with the available cable length.
• Fix the product with the 4 fixing holes on a solid, secure surface.
The surface must be such that the weight of the device is safely supported.
• Screw heads / washers must have a minimum diameter of 15 mm so that the mounting holes are
sufficiently covered.
• Do not mount the device upside down. Always mount the unit vertically so that the ventilation
openings are facing up and down.
• The circuit must not be overloaded by the rated current in heating operation.
• Never cover the transformer and always ensure sufficient ventilation.
A distance of at least 200 mm below and above the transformer is recommended.
• The transformer must be accessible and open for maintenance purposes.
Summary of Contents for E-NERGY CARBON BASIC TT 1200
Page 30: ...30 Notes...
Page 31: ...31...