Sequencer
----------------------------------
The
LITE II
’s sequencer is accessed by pressing GLIDE, hold and selecting one of four
sequences with the four top buttons. Further sequences can be selected by pressing 2
knobs instead of one. A total of 20 sequences can be recalled in this way (1...4, 11...14,
... 41...44). The sequence tempo is controlled by RATE.
All sequences can be transposed by incoming MIDI notes. To stop or change to another
sequence press GLIDE again. If you hit WAVEFORM (LFO) no new sequence will be started
but a NOTE ON is transmitted.
To record a sequence, press RECORD. Then select the sequence by press and hold GLIDE
with the sequence number. Enter the notes from a MIDI keyboard. Note duration is
ignored and automatically set to sixteenth. You can enter up to 32 notes. Simply press
RECORD after the last note (no matter if you entered less than 32 notes) to define the
end of the sequence. The sequence is looped continuously in playback mode.
A pause can be set at any position by pressing USER once. 1/8 notes are programmed by
holding the note until the counter increases to the next step (approx. 1 sec). By holding
the key even longer even quarter and longer notes can be defined.
