Keyboard Follow
Octave(OSC2) 0 = Off 1 = ¼
2 = ½
3 = ON
Release = Decay
Wave(OSC2) 0 = OFF
1 = ADSR1
2 = ADSR2
3 = ADSR1+2
MIDI In/Out
Glide/Shift 0 = Thru 1 =ProgChg 2 = ConChg
3 = both
Mod. Wheel
Wave(Mod) 0 = Off
1 = VCO
2 = VCF
3 = VCO/VCF
Polyphony - Cascading multiple LITE II modules.
----------------------------------
Although each
SYNTH LITE II
is monophic, up to five modules can be cascaded to act as a
polyphonic synthesizer. Connect the keyboard /sequencer to the first module and chain
the following modules in series. This is how it works: The last
LITE II
will play all
incoming MIDI notes, the second last has to play every second note and send out the
other one, the third plays every third note and sends the other two notes and so on.
Switch on your Lite II modules while holding:
•
OCTAVE (OSC1)
this
LITE II
will play all notes
(This is the standard setting)
•
WAVEFORM (OSC 1)
this
LITE II
will play every second note and
send the other to its MIDI output
•
OCTAVE (OSC2 )
this
LITE II
will play every third note and send
the others to its MIDI output.
•
WAVEFORM (OSC2)
this
LITE II
will play every fouth note and send
the others to its MIDI output.
•
GLIDE
this
LITE II
will play every fifth note and send
the others to its MIDI output.
Tip:
You can try to use other keyboards in the last position to split polyphonic sounds
across different modules.
