- 29 -
Rear Panel - Connections
DC-IN
– this jack allows connection for the supplied power adapter.
Use the
POWER ON/OFF
switch alongside to turn DOMINION CLUB on
and off.
Hint:
Only use the supplied USB-power-connector! The bus-power
performance of a computer USB-port is mostly insufficient to power
the analoge circuits of DOMINION CLUB.
USB KEYS
– this jack serves as connection to a MIDI-keyboard or MIDI-
controller with USB-output.
USB PC
– this jack serves to connect DOMINION CLUB to a DAW-
computer in order to transmit and receive MIDI-data.
M-BUS IN
– this jack serves as connector for devices being
compatible to the M-BUS specification. M-BUS is a protocol
developed by MFB which is comparable to MIDI but significantly
faster.
M-BUS THRU
– this jack passes on incoming data from the
M-BUS IN
input in parallel.
MIDI IN
–
this jacks serves as connection to a MIDI-keyboard, MIDI-
interface resp. MIDI-controller with standardized MIDI-connectors.
MIDI OUT THRU
– this jack
OUT
puts the MIDI-data of DOMINION CLUB.
With this jack being set to
THRU
(see page 20), incoming data at the
MIDI IN
will be passed through.
HEADPHONE OUT
(3,5mm) – connect a headphone to this output
which is individually adjustable in level.
AUDIO OUT
(6,3mm) – this jack provides the audio signal output and
can be connected to a mixing console, an audio-interface or an
amplifier.
