- 24 -
Gate Length
Use the Gate Length function to set the length of the gate-impulses.
The value specified is global for all notes but can be manually
changed during playback.
•
Press
GATE LENGTH
button in the lower row
•
The display shows the current value, e.g.
080
080
080
080
•
Use
VALUE
control to set a value between
000
000
000
000
and
llll00
00
00
00
•
Press
ENTER
button
Step Length
The number of steps can be adjusted for the sequencer and
arpeggiator (for a parallel motion-sequence, see page 27).The
maximum length can be 8 bars at maximum (4 bars at
32’
32’
32’
32’
resolution
(scale)).
•
Press and hold
SHIFT
button
•
Press
STEP LENGTH
button in the lower row additionally
•
The display shows the current value, e.g.
0
0
0
0llll6
6
6
6
•
Use
VALUE
control to set a value between
00
00
00
00llll
and
llll28
28
28
28
•
Press
ENTER
button
Synchronization
With an external MIDI-clock being applied to DOMINION CLUB, the
arpeggiator resp. sequencer will automatically be synchronized to
the clock.
With DOMINION CLUB being setup as clock-master, the internal
clock can be used via
MIDI OUT
resp.
USB PC
to serve as master-
clock for external devices.
•
Press and hold
SHIFT
button
•
Press
SYNC ON/OFF
button in the lower row additionally
•
The corresponding LED will be lit green
•
The display shows the current state
•
Use
VALUE
control to select a value between
on
on
on
on
and
oFF
oFF
oFF
oFF
•
Press
ENTER
button
