MFB DOMINION CLUB, Operating Manual

Page: 14 / 32

- 14 -
ENVELOPES
DOMINION CLUB offers two ADSR-envelopes. Envelope
ENV1 is
permanently assigned to the filter by the CONTOUR control.
However, it may additionally be used to control the oscillators in
parallel using
MOD SEL / MOD AMT (see page 11).
Envelope
ENV2 controls the VCA and therefore the sound's level
contour.
Retrigger
Both envelopes can individually be adjusted in their response
behavior. Either the envelope will normally be triggered for a single
pass (
trG trG trG trG ) with every incoming note or it will run looped ( LoP LoP LoP LoP ) for the
duration of the note being held on a keyboard resp. by a
sequencer. The loop-length is specified by adjusting the values for
ATTACK , DECAY and RELEASE . Audio effects may occur if setting
these parameters to minimum values.
•
Press RETRIG ENV 1 button in the lower row
resp. press and hold SHIFT and ENV2 button additionally
•
The display shows the current state
•
Use VALUE control to select a value between
trG trG trG trG
and
LoP LoP LoP LoP
•
Press ENTER button