MFB DOMINION CLUB, Operating Manual

Page: 18 / 32

- 18 -
2 VCA VEL
This parameter adjusts the effect velocity data of an attached
keyboard take on the VCA resp. the output volume.
•
Use SEL control to open menu 2.
VCA
VCA VCA
VCA
will be temp. displayed
•
The display shows the current value, e.g. 095 095 095 095
•
Use VALUE control to set a value between
000 000 000 000
and
llll27 27 27 27
3 VCF VEL
This menu adjusts the effect velocity data of an attached keyboard
take on the filter frequency, resp. the
CUTOFF parameter and the
calibration of the filter's resonance.
•
Use SEL control to open menu 3.
VCF
VCF VCF
VCF
will be temp. displayed
•
The display shows the current value, e.g. 095 095 095 095
•
Use VALUE control to set a value between
000 000 000 000
and
llll27 27 27 27
•
Use SEL control to open menu 3.
VCF
VCF VCF
VCF
will be temp. displayed
•
Press SHIFT button. The display will temporarily show rES rES rES rES
•
The display shows the current value, e.g.
llll00 00 00 00
•
Use VALUE control to set a value between
000
000 000
000
and
llll27
27 27
27
4 LFO3
This menu adjusts the speed of
LFO3 . This LFO offers a triangle
waveform and always addresses the same modulation target which
is selected for the modulation-wheel resp. MIDI-controller CC#01
(see page 19). The modulation of
LFO3 only applies with the
modulation-wheel resp. MIDI-controller CC#01 being active (a value
larger than zero).
With the speed for
LFO3 being set to a value of
000
000 000
000
, LFO3 will be
deactivated. In this case, the modulation-wheel resp. MIDI-controller
CC#01 solely addresses the modulation target.
•
Use SEL control to open menu 4.
Lfo Lfo Lfo Lfo
will be temp. displayed
•
The display shows the current value, e.g.
000
000 000
000
•
Use VALUE control to set a value between 000 000 000 000 and llll27 27 27 27