Scribe SA Standalone Series Operator’s Guide
Document Revision: 03/24/06
Page 20
•
If you pressed the “Stop/No” key at you will be prompted to “Set the
Drive Order”:
•
Press the “Stop/No” key if you do not want to reset the drive order.
Press the “Start/Yes” key and you will then see the following screen:
•
All of the drives will open at this time:
•
Close the drive tray of the drive you would like to be drive number
“1”. It can be any one of the drives. You will then see the following
screen:
•
Close the remaining drives in the order that you would like them to
read and the Scribe SA Standalone will reboot.
