Scribe SA Standalone Series Operator’s Guide
Document Revision: 03/24/06
Page 16
ROM Mode 2, CD-ROM XA Mode 2 Form 1, and audio (CD-DA)
discs can be compared.
•
1- The factory setting for this function is disabled. When enabled,
the
Multiple Images
feature allows up to six images to be stored on
the hard disk drive at one time. This setting will remain in effect
until disabled, even after restarting the Scribe SA Standalone.
•
5- Pressing the “5” key will give you the option to choose a printer
or disable the printer option. See the
Utilizing the Printer
Option
section of this manual for more information.
•
7-Pressing the “7” key will give you the option to seperate the bins
for DVDs and CDs. This is called Spindle Selection. When this
selection is enabled, the bins are separated as follows. Input Bin #1
is for for CDs, Input Bin #2 is for DVDs. Input #3 (if no printer is
used) is disabled. The Output Spindle will be used for both CDs and
DVDs.
•
Not used.
