5
6
Keep the unit clean and dry at all times.
Wash and dry your skin thoroughly prior to shaving.
In order to achieve the closest shave and avoid unnecessary wear on
the foils, be sure that both foils contact the skin simultaneously. Do not
hold the shaver at an angle where only one foil contacts the skin - this
will cause distortion of the foil and may result in skin irritation.
Stretch your skin with your free hand while using short, circular
strokes. This will make the hairs stand out from your face and allow
the cutting heads to reach them more easily. Shave against the grain
for optimum results.
To facilitate cutting and avoid foil wear, do not apply the shaver to
your skin with high pressure.
The normal replacement period for the foil screens is about 6 to 12
months. In order to maintain shaving performance and comfort,
replace the cutters at least once a year. To order replacement parts,
please refer to the "Ordering Replacement Parts" section of this
manual.
Shaving Tips:
BE SURE TO READ THE ENTIRE MANUAL CAREFULLY BEFORE
OPERATING THE SHAVER.
Congratulations!
This shaver is designed and manufactured to exacting standards in order
to provide you with years of close, comfortable shaves.
It normally takes about three weeks for your skin to adjust to a new
electric shaver. As you use the shaver, you will develop a shaving style
that is most comfortable and effective for you. This "breaking in" period
may be somewhat longer for those with sensitive skin or those who vary
their shaving techniques.
Upon unpacking the shaver, you may notice a white/gray powder on the
inner cutters and surface of the foil screens. This is a factory-applied
lubricant that will help ease the breaking in period and disappear with
normal use.
Remove the protective plastic headguard. (Figure 1)
Ensure that the foil screens and inner cutters are not damaged.
Replace damaged parts before using. To obtain replacement
parts, refer to the “Ordering Replacement Parts” section of
this manual.
To turn the shaver on, depress the lock button and slide the
on/off switch up to the “on” position. (Figure 2)
Gently stretch the skin of your face with your free hand while
moving the shaver slowly and smoothly against the grain of
your beard. Hold the shaver at a 90˚ angle to your face while
maintaining contact with the foils.
To shave the chin area, gently pull the skin upward and stroke
the shaver in an easy up and down motion. To avoid
damaging the delicate foils, do not apply high pressure.
Turn shaver off and replace protective headguard.
Turn the shaver on.
Push up the trimmer switch button into its locked position.
To trim sideburns, hold so that the trimmer lightly touches the
skin at a 90˚ angle and move downwards. To avoid draining
the battery, keep the trimmer in its off position when not in use.
Turn the shaver on.
Slide the on/off switch up to the “FINE” position.
Place the adjustable foil in gentle contact with your skin.
Move the shaver slowly while gently stretching your skin.
To Shave Longer Hairs, Sideburns or Beards:
The trimmer easily cuts the longer, hard to reach hairs of the face
and neck.
To shave mustaches:
Using this Shaver:
①
②
③
④
⑤
⑥
①
②
③
①
②
③
Fig.1
Fig.2
