9
10
Ordering Replacement Parts:
Replacement parts can be ordered by referring to the separate,
inserted leaflet which lists the service centre details. Part numbers of
spare parts are listed in the table below for your reference.
Part number
Description
A-3335F
Replacement Outer Foil Frame
for Model
PFS-3335
A-3335FC
Replacement Outer Foil Frame
and Inner Cutters for Model
PFS-3335
Repair Service Requirements:
Technical Specifications:
If your shaver needs repair service, please refer to the leaflet
included in this manual which lists the service centre details.
Input Power (Automatic):
100-240V 50-60Hz
Output
12V dc 650 mAh
To Replace Foil Screens:
To Replace the Inner Cutters:
Skin irritation or a deterioration of shave quality typically indicate
that your foils need to be replaced. Replacement intervals will
vary with individual use and hair types.
NOTE: Always replace foil screens when replacing the inner cutters.
(Please refer to the “Ordering Replacement Parts” section)
(Please refer to the “Ordering Replacement Parts” section)
Remove the foil screen assembly by pressing the release
buttons on both sides of the shaver and lifting off the assembly
off. (Figure 1)
The Outer Foils are mounted to the Outer Foil Frame. Release
the Foil Frame from the Foil Frame Base by gently sliding a
fingernail between the side of the Foil Frame and the Foil
Frame base. (Figure 2) Inverting the Foil Base will allow the Foil
Frame to drop out. (Figure 3)
Position the replacement Outer Foils over the cutters. Be careful
not to damage the foils. Gently slide the head assembly down
until it seats firmly into place.
Remove the foil screen assembly by pressing the release buttons
on both sides of the shaver and lifting it off. (Figure 1)
Remove the inner cutters by grasping and lifting upwards.
(Figure 2)
Be sure to hold the replacement cutters firmly as you carefully
insert them into the inner cutter mounts.
Push the replacement cutters down firmly until they lock into
place.
Replace the foil screen assembly and gently slide it down until
you hear it lock into place.
IMPORTANT:
For the best shaving performance and results, we recom-
mend that you replace the shaverʼs foil screens every six months and
inner cutters at least once a year.
①
②
③
①
②
③
④
⑤
Fig. 3
Fig. 2
Fig. 2
Fig. 1
Fig. 1
