9
Trunk support:
Turn up the trunk support push the
two padded tube pieces inwards and
turn down. Turn down the trunk
support push the tube pieces
inwards and turn up to the locked
position.
Brakes
The brakes are parking brakes that
work by directly blocking the rear
wheels with a braking pulley
pressing against the tire.
To brake the walking aid, pull the
brake levers all the way backwards
until they come to a definite stop. In
this position the brakes
are self-locking. The brakes are
released by pushing the brake
levers forward again.
Drag brakes:
The drag brakes work by the roller
at the back pressing against the tire.
First loosen the nut on the Allen
screw. Then turn the Allen screw to
press the roller against the tire.
Tighten the nut in the opposite
direction. Use a method of trial and
error to find the correct pressure
against the tire. Test the drag brake
function.
Front wheel swivel/locks
To activate or de-activate the swivel-
locks pull and turn the pin locks 90º.
Non-reverse brakes:
The non-reverse brake works by the
grooved side pressing against the
tire preventing the wheel from going
backwards. The non-reverse brake
can be engaged/disengaged through
the snap lock on the upper side of
the brake housing. Finally test the
function of the non-reverse brake.
