10
Anti-tip support
Anti-tip supports are mounted on
each side by first removing the
bolts fixing the wheels. Use a 6
mm Allen key. Place the anti-tip
support against the outside of the
rear fork of Meywalk® 4 so that
they fall into place in the two rear
fork recesses. Screw bolts on
both sides back on. Re-tighten
firmly.
Leg divider
Fasten the leg divider under the
seat bar with the two screws.
The leg divider is height-adjustable.
Loosen the screw at the
front of the central tube. Adjust
the leg divider to the desired
height and re-tighten the screw
firmly.
Leg guides
The leg guides are mounted on
the inside of the wheel frame on
either side. They are fastened at
the rear fork and at the point
where the connection tube is
connected to the wheel frame.
Fasten the leg guides with the
screws, threaded rods and Allen
screw heads that came with the
leg guides.
Trunk pad
The trunk pad is mounted on
the black polyurethane shell of
the center box. First remove the
screws and washers from the
shell. Then mount the trunk pad
using the screws that came with
the trunk pad.
Accessories
