Meyer SXI 720, Owner/Operator’S Manual & Parts Book, Page: 39 / 132

1-800-325-9103
PB-SXIC - 39 - www.meyermfg.com
Lubricate (3) chain couplers on the rear drive with new 30 weight oil. The couplers are accessible by opening the
front and rear shield.
Grease (2) PTO input shaft bearings with approximately 1 pump of grease. The bearings are accessible on the left
side of the PTO cover shield.
Grease (2) rear spinner lower bearings with approximately 2 pumps of grease. The bearings are grease line fitted
to the left rear frame channel of the spreader.
Grease (2) tandem wing pivots. Over greasing is not possible.
Grease (2) rear gate slide guides. Grease the slide guides from the top side with the rear gate opened. Allow
grease to lubricate rear gate ends and slide guide surfaces. In freezing weather, dump used motor oil down each slide
guide once a week or more often if needed. Over greasing is not possible.
Grease (1) integral overrunning clutch on the spinner transfer shaft connection to the corner gearbox.
SHIELDS REMOVED FOR ILLUSTRATIVE
PURPOSES ONLY.
L10
L20
L2
L20
L21
L12
L21
L22
L9
L14
L20
(LEFT SIDE)
L3
L3
L11
L19
L9
L13
L13
L23
RIGHT SIDE GREASE PORTS
LEFT SIDE GREASE PORTS
L20
L16
L1
L1
L10
L20
L18
L1
L24
L25
L25
L18
L9
L10
L11
L12
L13
L14