Meyer Boss 8200 RT, Owner/Operator’S Manual & Parts Book, Page: 41 / 100

1-800-325-9103
PB-8200-19 - 41 - www.meyermfg.com
Loosen the tensioner rod (Item 1) on the main apron chain.
This will allow easier adjustment of the adjuster bolt. Located
on the inner chain strand of each main apron assembly, there
is an adjustable, tightening pivot arm with a 1/2” x 1-1/4”
adjuster bolt. Turn this 1/2” x 1-1/4” bolt by first loosening two
set screws located on the adjustable pivot arm. Tighten or
loosen the 1/2” adjuster bolt to make fine adjustment/
tightening in the individual chain strands or to equalize stretch
in the individual chain strand pairs of each independent main
apron assembly. Retighten the two set screws and readjust
the spring loaded tensioner for correct apron tension.
8.3 CLEAN-OUT PANEL
Remove the six (6) bolts (Item 1) and remove both clean-out panels
(Item 2).
There is one cleanout panels under the unit for cross apron clean out.
5-1/2”
Correct apron tension occurs when the spring load tensioner
measures 5-1/2”.
Apron Chain Adjustment Bolts
1
Clean out all debris / foreign material from this area to maintain
proper cross conveyor chain operation.
1 2
2