Meyer Boss 8200 RT, Owner/Operator’S Manual & Parts Book, Page: 23 / 100

1-800-325-9103
PB-8200-19 - 23 - www.meyermfg.com
6.0 PRE-OPERATION
6.1 PRODUCT INSPECTION
6.1.1 Before Operating The Forage Box
Before operating the forage box for the first time and each time thereafter, check the following items:
1. Inspect the forage box for proper adjustments. (See 8.2 ADJUSTMENTS on page 39.)
2. Lubricate the equipment. (See 8.1 LUBRICATION on page 35.)
3. Make sure that all guards and shields are in place, secured and functioning as designed.
4. Check all main roller bearings for wear. Replace as needed.
5. Remove any twine, wire or other material that has become entangled around the apron drive system, front augers, or
cross conveyor system.
6. Check condition of all hydraulic components for leaks. Repair or replace as required.
7. Check the hydraulic oil level. (See 8.1 LUBRICATION on page 35.)
DO NOT allow anyone to operate, service, inspect or otherwise
handle this forage box until all operators have read and understand
all of the instructional materials in this Operator’s And Parts Manual
and have been properly trained in its intended usage.
Verify that the forage box is securely fastened to the tractor / truck.
Verify that all electrical / hydraulic connections and bolts / hardware
are tight and securely fastened before operating the forage box.
Always keep all shields and guards in place and securely fastened.
Keep hands, feet and clothing away.
Wear safety glasses to prevent eye injury when any of the following
conditions exist:
• When fluids are under pressure.
• Flying debris or loose material is present.
• Tools are being used.
Failure to heed may result in serious personal injury or death.
Hydraulic fluid escaping under pressure can have sufficient force to
cause injury. Keep all hoses and connections in good serviceable
condition. Failure to heed could result in serious personal injury or
death.