manualshive.com logo in svg

Meyer Blaster 350, Operation And Maintenance Manual

Share
Download
Meyer Blaster 350 Operation And Maintenance Manual Download Page 28

26

Removable Hopper Screen

The removable, welded-steel mesh hopper screen 

prevents large chunks of material into the hopper and im-

proves material flow. Available in 2" x 2" or ½" x ½" mesh.

Part # 34700 (2" X 2" Mesh) 
Part # 34701 (½" X ½" Mesh)

Sander/Vibrator Kit

Standard on 350S and 750S models, lets you spread a 

50/50 blend of rock salt and sand or sand only. Includes 

extended auger, vibrator, vibrator mounting plate, baffle 

plate and vibrator harness. 

Part # 34600

Spiral Auger

Is perfect for spreading free flowing material such as rock 

salt, calcium chloride and other ice melt materials.  

Comes standard on all models except 350S and 750S.

Part # 34306

Patented No-Leak Auger Kit (Course Material)

This brush auger kit prevents course material like  

free-flowing #2 rock salt from leaking through the  

throat of the spreader. It also provides a uniform  

salt distribution pattern.

Part # 34300

Patented No-Leak Auger Kit (Fine Material)

This brush auger kit prevents fine free-flowing material  

like fine salt from leaking through the throat of the spreader. 

It also provides a uniform salt distribution pattern).       

Part # 34301 

 

Salt Auger Kit

This auger is designed to provide maximum performance 

when spreading dry, free-flowing salt without clogging or 

tunneling. Includes all mounting hardware. Recommended 

to be used with the sander/vibrator kit (#34600) and flow 

gate kit (#34900).       

Part # 34118 

Chain Auger Kit

Helps break up material and provide excellent flow when 

spreading sand, fine gravel and salt mixes. Includes all 

mounting hardware. Recommended to be used with the 

sander/vibrator kit.             

Part # 34109

Flow Gate Control

The Meyer Flow Gate control system allows the end-user 

to set the material flow rate based on the material being  

used. The unit is made of 100% aluminum and will not 

rust, is lightweight and extremely easy to install. The unit 

clamps to the throat of the spreader. Simply clamp the 

flow gate unit onto the discharge throat of the unit,  

tighten the clamping screws, and the flow gate teeth  

bite into the discharge throat securing the control to  

the spreader. Salt is very expensive, and the flow gate  

control maximizes material discharge eliminating waste.

Part # 34900

26

Blaster Series Accessories

Summary of Contents for Blaster 350



































Reviews:

No comments

Brands by name

Popular brands

Load more brands