10
Vehicle Requirements for Installation
5 / 9 / 11
SAFETY PRECAUTIONS - See pages 5-6 for definitions
22 / 23
For installation Blaster 750 series spreaders:
1.
Due to the size and capacity of these spreaders we recommend
installation on full size trucks with a 1/2 Ton rating or higher.
2.
This product line can be installed on any vehicle with a class
3 hitch receiver that will accept a 2" square tube.
3.
If your vehicle is not factory equipped with a hitch, we
recommend taking it to a reputable trailer hitch installation
shop or your vehicles dealership.
For installation Blaster 350 series spreaders:
1.
This product line can be installed on any vehicle with a class
3 hitch receiver that will accept a 2" square tube and has a
tongue weight rating of at least 500 lbs.
2.
If your vehicle is not factory equipped with a hitch, we
recommend taking it to a reputable trailer hitch installation
shop or your vehicles dealership.
As with any vehicle accessory, please refer to your vehicle owners manual to verify that the
GVWR (Gross Vehicular Weight Rating) will not be exceeded, especially if this product will be
used in conjunction with other mounted equipment. If equipment is mounted to vehicle with
other than stock hardware or components, we the manufacturer cannot and will not be
held responsible for damages. Also, check your vehicle owner’s manual to be sure that the
installation of “aftermarket” accessories will not void the manufacturers’ factory warranty.
