CHAPTER 6: MOUNTING CAL LOUDSPEAKERS
34
INSTALLATION OF SINGLE POINT HANG KIT
Please verify presence of all kit components (Table 1) before
beginning the install procedure.
Installation Steps
1. Remove both screws and sealing washers from the
dress cap and set aside.
2. Remove the hex nut, washers, and bushing securing the
wall bracket to the loudspeaker. Remove the bracket.
Table 1: Single Point Hang Rigging Kit Contents
Part Number Description
Quantity
67.210.094.01 1-inch diameter Neoprene
Gasket, 3/16-inch thick for
attaching single point hang
(SPH) bracket to CAL
1
45.210.230.01 Single Point Hang Rigging
Assembly
1
109.051
Thin Hex Nut, 1/2-inch-13,
stainless steel for attaching
SPH bracket to CAL
1
113.043
Washer, 0.88-inch outside
diameter, 0.02-inch thick,
stainless steel
2
(1 for eye bolt,
1 for attaching SPH
bracket to CAL)
119.061
Washer, sealing, #10,
stainless steel for attaching
SPH bracket to CAL
1
119.060
Teflon Bushing, 0.50-inch x
0.56-inch to cover stud on
CAL
1
124.144
Eye bolt, Shoulder,
1/2-inch-13 x 1.5-inch,
2400 WLL
1
109.053
Hex Nut,
1/2-inch-13 X 7/8-inch
wide, 31/64 inches high,
stainless steel for attaching
eye bolt
1
124.145
Shackle, Screw, 3/8-inch,
2000 WLL
1
640.096
Threadlocker, Medium
Strength, Removable, for
eye bolt and SPH bracket/
bolt
1
Lock
washer
Hex nut
Steel flat
washer
Nylon flat
washer
Bushing
Bracket
Summary of Contents for CAL 32
