Meyer Burger BS 820, Manual

Page: 53 / 89

10002683-en-00 53
Note: The slackening of the band remains enabled until the button is pressed a second time!
7.1.2 Installing the saw band
Procedure
7.1.3 Tensioning the saw band
Procedure
11 Loosen the band tension and press
the confirmation button Fig. 5-10 /3.
12 Remove the saw band.
1 Select the band tension screen.
2 Extend the band supports and press
the confirmation button Fig. 5-10 /3.
3 Fit the saw band and check that the saw band is resting
on all band supports.
4 Tension the saw band up to a maximum of 2000 N and press
the confirmation button Fig. 5-10 /3.
5 Retract the band supports and press
the confirmation button Fig. 5-10 /3.
6 Change to the fall adjustment screen.
7 Loosen the brake and press
the confirmation button Fig. 5-10 /3.
8 Change to the band tension screen.
9 Set the band tension to reduced and press
the confirmation button Fig. 5-10 /3.
10 Rotate the band 2 – 3 times by hand.
CAUTION
Material damage and injury to people possible due to faulty saw band!
Check the saw band for cracks.
1 Close the cover.
2 Lock the doors.
!