Meyer Burger BS 820, Manual

Page: 17 / 89

10002683-en-00 17
3.4 Faultless state of the machine
Use the machine only in a technically faultless state and only for its intended use,
be aware of the safety regulations and dangers and follow the operating manual!
Clear (or have cleared) any faults, especially those that may impair safety, immediately!
3.5 Organisational measures
3.5.1 Safe and danger-conscious working
The personnel tasked with working on the machine must be familiar
with the operating manual before starting work. This applies especially to personnel
who work only occasionally on the machine, e.g. for preparation or maintenance.
Note: Personnel must not have open long hair, or wear loose clothing or jewellery
including rings.
There is a risk of injury, e.g. by getting caught in or drawn into the machine.
3.5.2 Safety and danger notes on the machine
Follow all safety and danger notes on the machine!
Keep all safety and danger notes at/on the machine complete and in a legible condition!
3.5.3 Changes to the machine
3.5.4 Initial operation
The initial operation of the machine may only be carried out by personnel authorised and
fully trained by MB or by an MB service engineer.
WARNING
In the event of safety-related changes to the machine or
its operating behaviour, shut down the machine immediately and
report the fault to the responsible office/person!
Do not make any changes, additions or alterations to the machine
that can impair safety!
This also applies to the installation and the adjustment of safety
equipment and valves and to welding at all load-bearing parts.
Spare parts must meet the technical requirements specified by
the manufacturer. This is always ensured with original spare parts.
Do not make any program changes (software) to the programmable
control system!
!