Meva MGC-F, Technical Instruction Manual

Page: 3 / 30

MGC-F
w
3
Technical Instruction Manual / May 2022
MGC-F
Safety Rules &
Recommendations:
Contents:
System overview ........................................................................................4
System overview – Top view ......................................................................6
Load details for the platforms ....................................................................7
Minimum and edge distances for the climbing cones .................................8
Installation of the climbing cones ...............................................................9
Determining the heights for the climbing cycles .......................................10
Location and installation of the climbing cones ........................................11
Ledgers and tension rods .........................................................................12
Access hatch and ladder system ...............................................................14
Ladder to the secondary platform ............................................................15
Ladder configuration ...............................................................................16
Assembly Press.........................................................................................18
Disassembly Process..................................................................................22
Service.......................................................................................................24
Notes.......................................................................................................25 This Technical Instruction Manual contains information, instructions
and guidance describing how to use the MEVA equipment on the
construction site in a proper, efficient and economic way. Most
examples shown are standard applications that will occur in practice
most often. For more complicated or special applications not covered
in this manual, please contact the MEVA experts for advice.
When using our products the federal, state, and local codes or
regulations must be observed. Many of the details shown do not
illustrate the wall formwork system in the ready-to-pour condition
as to the aforementioned safety regulations. Please adhere to this
manual when using the equipment described. All applications require
engineering calculations and analysis to guarantee safety.
Please observe the provided instructions for the the MEVA equipment
is used. Such instructions are intended to minimize site-specific risks
and should contain the following details:
£
The order in which all working steps including assembly
and disassembly must be carried out
£
The location, type, and number of anchors, ties, and
braces.
£
The location, number and dimensions of working
platforms including working area and protection
against falling
Important: Only well maintained material may be used. Damaged
parts must be replaced. Apply only original MEVA spare parts
for replacement. Attention: Never wax or oil assembly locks.