50
2) Unscrew the switch button of the piezo
igniter on the control panel (J) and insert
an AAA (1.5 V) battery into the hole; the
battery is not included in the package. Or
check the presence and state of charge of
the battery. Make sure that the positive pole
(+) is oriented outwards. Screw the switch
button back.
Connect and fasten the lower supports (K)
to the lower plate (N) and to the central
plate with the control panel (J).
First, set the lower supports in the correct
position by placing the stepped pins in the
lower plate into the cut holes (keyhole-
shaped) in the lower supports. Then fasten
the lower supports to the lower plate using
3 pcs M5 x 12 bolts (CC).
After that, set the lower supports and the
central plate with the control panel in the
correct position by placing the stepped
pins in the central plate into the cut holes
(keyhole-shaped) in the lower supports.
Finally, fasten them to each other using
3 pcs 3/16″ screws (HH).
(The central plate with the control panel (J)
must be turned during installation so that
the controls on the control panel are in
position according to Pic 2 in relation to
the cylinder attaching tape (L) and the
wheels.)
CC
x 3
HH
x 3
MM
x 1
2
J
K
CC
N
HH
L
Summary of Contents for FH600
